Search This Blog

Monday, June 13, 2016

Thoughts On Carrying a Firearm in the Aftermath of the Orlando Terrorist Attack.

This post is off the rails of the intention of this Blog and has nothing to do with building a Black Rifle.  It does, however, have everything to do with the idea of using a Black Rifle, or a smaller tool for remote application of heavy metals, for it's original designed purpose: to eliminate the threat from the most prevalent and dangerous of predators.  It was written originally in response to a discussion on carrying a firearm for the purpose of self protection. Unfortunately, in my opinion, the respondents had an unclear view of what exactly that meant.  The picture below started the discussion:



Unfortunately an individual that wasn't necessarily anti-2A but not a gun owner chimed in and expressed his concern with the general premise.  Not that he is against people carrying, but he is not comfortable with buying a gun and carrying it without the knowledge of how to use it.  Similar thought to someone stating that the only way to be safe in an airplane is to buy a parachute and wear it when you are in a plane - without the training on how to use said parachute. 
The disturbing element was when a firearms instructor chimed in and made the statement that handguns are not all that dangerous and that 80% of the body is non-vital, therefore you don't have to be the first shooter in a situation - with the implication that one can absorb bullets from an aggressor and still respond in kind to end the fight....  My reply to the situation is as follows:

******, if the premise of carrying a gun was to kill someone your thought process is right on. However, if you adopt the philosophy that a firearm is merely a highly efficient tool used to end a threat to your (or an innocent's) life, the connection is much easier. HOWEVER, one does not simply strap a gun to one's hip (or wherever) and suddenly become a defender of the masses. There is an enormous responsibility one must understand and embrace when one decides to carry a firearm (with great power comes great responsibility), AND thoughtful and serious education and continual training must be committed to. I am somewhat disturbed by the comments by ******** (a firearms instructor) that portend (at least appear to) the thought of someone using a firearm defensively to "wound" (if I misconstrued your comments ******* I apologize). No legitimate training teaches the use of a firearm to accomplish any mission other than to stop the threat. To do that, you visit harm on the threat until that threat is no longer functioning as a threat. This action can be as slight as exuding a non-victim presence to the extreme of introducing a volume of heavy metals into the circulatory and neurologic centers of the threat sufficient to cause said systems to cease to function. NEVER EVER put a weapon on your body or in your hands thinking you will use it to kill unless you also intend to spend the remainder of your life in prison. Finally, understand that "killers" and "terrorists" do not view or value life as you or I do. They are able to disassociate their actions with the weight of life. This is an enormous hurdle that the 'normal' person has to overcome when trying to deal with how to accomplish the action of ending the threat. I cannot begin to explain this concept in a Facebook post (too long already). Tim Larkin's book " How To Survive the Most Critical 5 Seconds of Your Life" does a very good job of illustrating the difference in mindset between predators and their prey and should be read by anyone that wants to enter the discussion of self protection. Sorry for the lengthy post but this is heavy stuff that cannot be understood in Facebook 'sound bites.

I would actually like to hear any feedback anyone has on this topic.  Again, I apologize for the non-build post (not that there are many of those on here), but things being what they are I felt it appropriate.

Friday, October 30, 2015

Next step?

Now I am looking at CNC machines for creating my own parts. I am looking at this company and they have a give away going on.... Maybe I will get lucky.

http://www.probotix.com/

Sunday, October 18, 2015

Dark Times



In media-frenzied anti-gun rhetoric chaos spurred on by another gun free zone mass shooting, personal-fear driven political agendas are once again threatening the American way of life. Ignorance abounds...or not. Seriously, do politicians really expect me to believe that they truly believe eliminating the second amendment and eliminating guns in America will make Americans safer? BULLSHIT. I know the agenda is NOTHING about keeping me safer. It is 100% about eliminating my ability to exercise the fourth branch of government the founders built in with the second amendment 
. The citizens ability to check tyranny.
Ask yourself this: In a time of mass shootings and "out of control" gun violence, when was the last terrorist attack on a politician protected by an armed security force? What if these wack-jobs knew that the school they were going to shoot up had an armed security force and trained armed faculty?
That being said, on to the build updates
.264 LBC
Finished.  BHW 22" barrel in the semi-bull contour. Great barrel but a bit of a PITA due to the .875 dia at the gas block and muzzle.  
After an exhaustive search I found www.muzzlebreaksandmore.com. Nathan hooked me up with a gorgeous four port break that matches the BHW barrel perfectly. After some smithing, I was able to time the break without a washer. New skill learned. The best part - the price. This is a very high end quality, custom brake at mass production Chinese prices. 

The next item of consternation was the gas block. Being that I am dealing with a .875 barrel and wanted to keep the gas block matching the barrel, I spent a bit more at Brownells to get what I wanted. I made it up with the hand guard I got off Craigslist from someone wanting a shorter look. I ended up with this 15" key mod free float hand guard for ~$50.  I added a Magpul UBR stock and a CAA bipod to finish it all off. As far as optics go, I had a couple options. I have an older Nikon that was on a .280 Norma mag; it performed well but I didn't like reticle. I tried a NC Star MKIII 2-10 scope just for kicks and am constantly surprised by the way these scopes perform. I feel like this gun can outshoot me right now.

Tuesday, June 24, 2014

.264 - Progress?

As with most of my builds this one is taking on a life of it's own. The hold-up right now is with the free-float tube. I have decided on the 24" bbl, but I don't like the rifle length handguard on such a long barrel, and 15" handguards are hard to find and not what I am wanting. Sooo, I am going to build my own using a Seekins Precision FF handguard nut and a carbon fiber tube. Thus the first hurdle. The nut has an OD of 1.8", most carbon fiber tubes come in either 1.75" or 1.84" ID, do I sand down or shim up....? On a side note, I am going shooting this weekend and have been turned on to the Black Death Challenge. A work colleague came up with his own target and I will give it a try. Feel free to make it your own.

Monday, February 11, 2013

.264 LBC

This is definitely NOT the time to start another build, but I have been doing a ton of research and have decided that I want a long-range rifle that can also be used to hunt pig, antelope, and deer.  I like the idea of the 6.8SPC and have many friends that swear by it's accuracy, but I want something that has some legs.  Thus the .264 LBC, a slight variation of the 6.5 Grendel. This slight change from the 6.5 Grendel gives more consistant accuracy and longer brass life...sounds good.

What I have:
I have, as I have shared before, is a very nice lower that I purpose built for accuracy on my Service Match Rifle.  I love the trigger pull, but the grip and stock is a bit clunky.  I would like to have more tuning options on the length, and a the Pearce grip on my first build is incredible...so, for now I will probably use the lower on my first build.
I also have a nice upper from SOTA Arms.  This is a very high quality piece of engineering that will hold the rest of the upper parts very well. 
I have the rifle length gas tube, a low-profile gas block, and a muzzle break and crush washer from SOTA Arms.
Not a lot, but enough to make me want to finish the upper.

What I need:
The heart and soul of this build will be a BlackHoleWeaponry barrel.  I haven't decided weather I want a 20 or 24" barrel, but am leaning for the 24" just to have the ability to really stretch the capabilities of the .264 LBC round. 
Obviously, with long range accuracy I will have a free-float hand-guard. I will try and keep this as light as I can without breaking the bank.  I am looking very hard at YHM lightweight designs, however I also really like Rock River Arms TRO XL handguard.
Now for the tough part, I need a bolt carrier group. Right now, bcgs are not available anywhere.  I have one on order from Del-Ton, but....waiting....
A bolt is fairly easy to get from Tactical Ammunition, and if I need to I can use a bolt carrier from another upper for the time being.

That's pretty much it for now.... I guess I will see what I can find and hopefully get something together in the next few months.

Thursday, April 5, 2012

Service Rifle Build

Here is what I got:
White Oak Armament Service Rifle Barrel: $205
RRA NM barrel sleve: $90
RRA two stage trigger: $75
RRA NM Carry Handle: $115
A2 Stock: Free (traded for M4 Stock)
RRA Stock weight: $20
.050 NM front sight post:$5

Total paid for this build was ~$550 after shipping and misc. pieces and parts. If you check the RRA page you will see that the prices I am posting are way below the retail prices. I have an 03 FFL for the purposes of collecting old firearms, but it really pays off with the discounts RRA offers. If you are serious about building AR platforms, pay the $30 and get your FFL.

The actual build process was very straight forward, the most difficult part was getting the barrel and the sleve installed to where all the parts line up. Also the Front Sight Post on the WOA barrel is windage adjustable, and the set screw lines up right under the sling mount on the barrel sleve. This is a pain, but a few seconds with a dremmel and a cut off wheel created a notch that gave me access to the set screw. The key to a NM build is to take your time, don't force anything, and use the right tools.

Results:
I don't have a 600m range to really put this rifle through it's paces, but after getting the sights dialed in I was sub-moa at 200 yards with very little effort. This rifle is HEAVY, which is bad if I wanted to take it on a jungle patrol, but the furthest this thing will travel on a sling is from the firing line to the mat. Strictly a match rifle, unless the zombie appocolypse hits then I will post up on the roof and get them before they know I am there.

Thursday, August 18, 2011

Here we go

After tons of research on the way ahead for the Squad Designated Marksman Rifle (SDM-R) and looking hard at what I am wanting, I decided to build an AR for Service Rifle matches. I have the upper and lower receiver, but I will basically need to start from there. I believe I can do this for under $500 if I am smart and look for bargains.

Barrel ~$200
Sights ~$150
Free Float sleeve~$75
Stock~$50

That leaves about $25 for incidentals.

Tuesday, January 18, 2011

Mix'n it up

So I inherited my dads AR about a year ago when he died, it is exactly the same as my base model from del-ton, without the add ons. I really don't need two tactical 16" EBRs so I am looking to build a designated marksman 20". We'll see where this leads, but I am looking at White Oak Armament CMP barrel and the ff sleeve.

Wednesday, July 21, 2010


I really need to get better about posting to this Blog, but no one is reading it anyway. Last I posted I was looking for a 1911 style grip and had everything else. I found the grip and it was $15, I ended up paying ~$25 for the upgrade rubber and the molded finger insert; well worth the money. The last thing I need is a front picatinny sling mount, but that can wait until I get to Parallax Tactical here in San Diego.

Some long awaited photos of the finished project.

Wednesday, May 5, 2010

Latest update

It has been awhile since I have updated this. Here is where I stand with the EBR. To direct the bullet to the target I have a NcStar Mark III 2-7x32 Tactical Scope with quick release mount on top of a 1/2" Picatinny rail riser, backed up by Magpul Back-up sights (MBUS). I took this set up to the range and it worked out pretty well, I wasn't able to get a real good sight in session but the bullet hit the target in the general area I wanted it to. I need to get to a good range to do things right. At the range I noticed that the rails on the handguard were pretty uncomfortable so I picked up three sets of Magpul XTS rails in Black, Flat Dark Earth, and Olive Drab. This made a huge difference in comfort and looks cool too in a "camo" pattern. I probably need one more set to complete the look but it is functional. I had a forward grip I got from an armorer during a deployment that I stuck on, it works well and folds to get out of the way. Last item that I put together is a single/double point bungee sling I built from looking at pictures and reading other peoples builds, it works well, is fairly comfortable and was about 1/4 what a commercial rig would cost. To transport I built a maple case using some curly maple that I had laying around, it is a bit heavy but looks great and gets attention when I bring it out. That's all for now, I still intend on putting a light/laser, and possibly a bipod. I would eventually like to replace the grip, I found a 1911 style grip adapter that looks really nice and is pretty inexpensive ~$15. As soon as I find someone that has one in stock I will get it.

Thursday, February 4, 2010

Douglas Adams quote

The designer of the gun had clearly not been instructed to beat about the bush. 'Make it evil,' he'd been told. 'Make it totally clear that this gun has a right end and a wrong end. Make it totally clear to anyone standing at the wrong end that things are going badly for them. If that means sticking all sort of spikes and prongs and blackened bits all over it then so be it. This is not a gun for hanging over the fireplace or sticking in the umbrella stand, it is a gun for going out and making people miserable with.'

Wednesday, February 3, 2010

Finished???

It is true that an AR build is never finished. I have had the "completed" rifle for a couple of months and am still looking for stuff to upgrade/accurize/make it better. I got a set of two-piece four-rail UTG handguards from the AR-15.com Equipment exchange for $40. Not a bad price considering everyone else is out of stock.
I still have to pick up the optics, I am all but committed to a NcStar MKIII 2-7 scope. The dealer that I am getting it through is throwing in a small double rail mount that goes on the scope for $6 bringing the total to $96 shipped. I don't know if a better deal exists out there. I just need to hurry up and buy the dang thing.
As far as ammo, I have about 600 rounds. I know I need more but with the crazies in California there is none to be found in the stores that is less than $.75 a round, I was having issues paying $.50 a round a few months ago. I am working on a reloading setup but that will take some time.

Wednesday, November 4, 2009

The Build

I received my mid-length kit from Del-Ton yesterday and have to say the quality of what I received was way above what I expected. Additionally the Essential Arms lower was perfect as well. I had made a cursory inspection and things looked good, but when putting the LPK into the lower I discovered how good it really was. The fit and finish was flawless, there was no filing, grinding, reaming, or adjusting necessary.
Total time it took to put everything together was around 2 hours including gathering the tools I would need. I was prepared to get a punch set, detent installation tool, vice block and all the other stuff that is recommended; I didn’t and was able to get it together with little or no drama.
I followed the guide on AR15.com With the exception of the Cal compliant bullet button it was step for step easy to follow. The Bullet Button was actually easier to install than the standard mag release so there was no drama there. Below is a step by step summary.

Tools.
I found the only tools needed were:

A hammer – I used an adjustable face mallet I got at Harbor Freight for $4 with a coupon, it has four different faces that can be used in varying hardness, for the most part I used the hardest plastic face and the metal face.

65516-0VGA Central Forge
4-in-1 Quick Change Multi Head Hammer
$6.99


Three piece nail punch set

41988-0VGA Central Forge
3 Piece Nail Punch Set
$3.99

This was used in place of the roll-pin punches, it has tapered tips that fit nicely into the roll pins and worked very well.

A hemostat – basically a small locking clamp. Harbor Freight carries them but you can also pick them up anywhere small tools are sold.

12" Locking Clamp 94952-0VGA
$4.99
This was extremely helpful when installing the small detent pins.

Locking pliers (Vice Grip®) – I used a set of needle nose locking pliers but pretty much any configuration will work as long as it can open larger than 1”. The larger you use the more leverage you have, but don’t go over about 10”.

10" Curved Jaw Locking Pliers with Wire Cutter Irwin Vise-Grip 3294-0VGA
$5.47
The pliers were used to press in the roll pin when installing the mag catch release and the trigger guard. VERY helpful.

Small flat piece of metal – I used a small screwdriver that I had ground flat, but a small metal ruler or other thin flat piece of metal will work. This is to hold the front takedown pin detent down while inserting the pin. A tool is available for this purpose, but unless you are building multiple lowers it isn’t worth it.

¼” hardwood dowel or metal rod – used in the installation of that pesky front take down pin, holds the detent down while you push in the pin.

Large clear plastic bag – I used a 1 gallon ziplock bag to put over the lower while installing the front take down pin to keep the detent contained when it launches (yes it will).

Electrical tape – protects the metal parts from scratches.

#10 flathead screwdriver for installing the grip

Gun oil, eye protection, pad for assembly, block of wood (1”), patience…lots of patience

Overall, the build is very simple and only requires a few cheap tools. Make sure you tape up the lower and the locking pliers to keep from scratching things up and things will go fine.

There are a couple difficult steps that take some time and finesse; the bolt catch release and the front take down pin.

The bolt catch release:
FIRST, TAPE UP YOUR LOWER SO YOU DON’T SCRATCH IT!!! NEXT, TAPE UP YOUR PLIERS SO YOU DON’T SCRATCH YOUR LOWER. Put a small amount of lube on the end of the roll pin and if necessary you can squeeze the end down a little. Using your hemostat or small needle nose pliers line the pin up with the hole and squeeze it in a little using your locking pliers. DO NOT PUSH THE PIN IN MORE THAN A COUPLE MILILMETERS. Insert the spring and buffer, line up the release and carefully squeeze the pin in the rest of the way. You may need to tap the pin in to seat it fully, but by then the hard part is done.

The front take down pin:
DO NOT LET THE DETENT LAUNCH ACROSS THE ROOM. WHILE COMPRESSING THE SPRING PUT THE BAG OVER THE RECEIVER AND WORK INSIDE THE BAG. The technique I used was to insert the 1/4” rod into the holes from the left side of the receiver, then gripping the detent with the hemostats, guide it into the hole compressing the spring as far as I could. Using the rod and flat piece of metal together press the detent down and the rod forward until it is held down by the rod. Finally, carefully press the rod out with the takedown pin allowing the detent to transfer over to the pin. If you get this the first time you are amazing, it took me about five times to get things lined up right, but when it worked it went smooth.

Everything else is cake and with a little patience should be easy. There are many other hints out there, read all of them, take notes, and have fun. My build took all of about 1 hour and when it was done I was left thinking “that’s it?”.

Monday, October 26, 2009

On it's way

Things are really moving now. I was billed for the kit on Thursday and it shipped Friday. I don't have an ETA but I will be gone this week anyway. I have everything I need except the four-rail hand guard which isn't absolutely necessary, and optics. I do have a red-dot but it isn't the best quality, it will work for now.
Ammo supply is low but more is on it's way and I have enough for sighting and op-testing.

As a final note before I get to building, Del-Ton has been extremely professional and the customer service has been superb, there was an issue with my fathers order and they took care of things without any drama. At this point I highly recommend Del-Ton.

Thursday, October 22, 2009

On it's way

Called Del-Ton on Tuesday to see about where my order is at and I was plesantly supprised. They were waiting on a four-rail gas block that was out of stock. I asked if there was another option, which of course there was. I cancelled the four-rail for a single rail and it went to the floor to be built yesterday and should ship today or tomorrow.
I will be gone next week but I have a great project to look forward to next weekend. Wooo-hoo!

Wednesday, October 7, 2009

Boooooo

Called Del-Ton last Monday and asked about when I should expect my kit. They said that they are just now getting to April orders and it will be a few more weeks....CRAP.... I guess I will keep waiting and collecting parts and ammo.

Thursday, September 24, 2009

So here we are, well into week 17 of waiting on my order from Del-Ton. I am going to be in Pascagoula, MS next week, so of course, my upper will get here then.
Currently here is where I stand as far as getting this thing together:
What I have:
Lower - Essential Arms stripped lower (OLL - an important factor in California) $0 (thanks Dad)
Sights - MBUS front and rear $85
California Compliant items - Prince50 Bullet Button and Action Wrench $25
10 round Magazine - $12
Ammo - 100 rounds .223 $50(can you believe this shit?)

What I need:
Upper assembly and lower parts kit - on order from Del-Ton $533
Primary sight - would like a 2x scope or variable, I have a red dot but would like a scope
Sling/sling mount - ~$50
Ammo - I would like to have around 1K reserve and 500 rounds to play with ~$500
Four rail handguard - Can be found for ~$70
Total I will have $700 invested with about another $100 for "dig-me" items NOT counting ammo...not bad considering it would cost me ~$1500 for the same rifle plus all the California fees and such.

Still waiting....

Thursday, September 10, 2009

MBUS

Received my sights today, great shipping time. Ordered them on Tuesday and got them today. Great quality, MagPul definitely did not let me down on this one.

Wednesday, September 9, 2009

Sights

Yesterday I ordered my open sights. I got MagPul Back-up Sights (MBUS), front and rear sights from machineguntours.com for $85 shipped - about $15 cheaper than any other site I found.
I received the Prince50 Bullet Button and Action Wrench a couple of weeks ago, talk about good quality - I am impressed. The magazine that also came is really nice. I can't wait to get going on this build and get the kit in the mail from Del-Ton.

Thursday, August 13, 2009

California compliant parts ordered


Found a Prince50 Bullet Button at parallaxtactical that comes with a free Action Wrench for $25. I was also able to pick up a 10 round mag for $13 when purchased with the BB. This is the best price for these things I need that I have been able to find so far (and yes, I intend to stop looking). I also purchased a couple extended take down pins, I was trying to get the purchase over $50 for the free shipping, but couldn't do it...doesn't really matter, spending $10 to save $5 just doesn't make sense to me.